PRODUCT INSTRUCTIONS
Remove the liner to reveal the adhesive.
Press the adhesive onto the wall (for products, like wallpaper and stickers, your work is done here)
Place your masterpiece ontop of the adhesive/wall and voilà!
Your complete guide to mounting your products to your wall.
TilePix
Classic TilePix is a 8.25" x 8.25" recycled resin frame and comes with 1 pad and 1 magnet. 12 x 12 Tilepix is a 12" x 12" black wood frame and comes with 1 pad and 1 magnet. 12 x 18 Tilepix is a 12" x 18" black wood frame and comes with 2 pads and 2 magnets.
1. Clean - Using dish soap, wash your wall and dry it completely.
2. Detach - Remove the magnetic wall pad from the back of the TilePix.
3. Apply - Peel the liner and firmly press the entire pad to the wall for 30 seconds.
4. Stick - Center TilePix over the pad and snap to the wall.
5. Slide - Adjust to desired position without removing from the wall.
TilePix Glass
TilePix Glass comes with an 8.25" x 8.25 piece of glass and is assembled with 1 magnet and 1 pad. 11" x 14" Glass comes with one piece of 11" x 14" glass and is assembled with 2 pads and 2 magnets. 16" x 16" Glass comes with one piece of 16" x 16" glass and is assembled with 4 pads and 4 magnets. 16" x 24" Glass comes with one piece of 16" x 24" glass and is assembled with 4 pads and 4 magnets.
1. Clean - Using dish soap, wash your wall and dry it completely.
2. Detach - Remove the magnetic wall pad from the back of the glass.
3. Apply - Peel the liner and firmly press the entire pad to the wall for 30 seconds.
4. Stick - Center glass over the pad and snap to the wall.
5. Slide - Adjust to desired position without removing from the wall.
Skateboard
Each skateboard comes with one 8” x 31.5” skateboard and is assembled with three magnets and pads.
1. Clean - Using dish soap, wash your wall and dry it completely.
2. Peel - Remove the liner and attach the wall pads (non-sticky side) to the skateboard’s magnets. Press the entire skateboard to the wall for 30 seconds.
3. Remove - Leaving the magnetic pads adhered to the wall, detach the skateboard.
4. Secure - Firmly press the magnetic wall pads against the wall for an additional 30 seconds.
5. Slide - Reposition the skateboard back onto the magnetic pads. Adjust to desired position.
Poster
Each poster comes with one 11 x 17 poster and 4 pieces of tape.
1. Clean - Using dish soap, wash your wall and dry it completely.
2. Detach - Frist, remove the white release liner from the tape and apply that side of the tape to the back corners of the poster. Then, remove the wall side release liner (REMO ONE).
3. Place - Put the poster on the wall.
4. Smooth - Use your hand to gently press down on each corner to adhere the tape to the wall.
Hanging Canvas
Each hanging canvas comes with one assembled 11 x 17 canvas, complete with two pieces of wood on the top and on the bottom, as well as 1 ½” pad and magnet.
1. Clean - Using dish soap, wash your wall and dry it completely.
2. Detach - Remove the magnetic wall pad from the back.
3. Apply - Peel the liner and firmly press the entire pad to the wall for 30 seconds.
4. Stick - Center the magnet over the pad and snap to the wall.
5. Slide - Adjust to desired position without removing from the wall.
Wallpaper
Each roll of wallpaper is on a removable 4.5' x 2' sheet.
1. Clean - Using dish soap, wash your wall and dry it completely.
2. Detach - Peel off 4 inches of the liner and press the sheet to the wall.
3. Apply - Continue peeling slowly as you work to adhere the wallpaper to the wall.
4. Smooth - Use a flat object and your hands to smooth down the wallpaper as you work.
5. Align - With a 1” overlap, place your connecting panel atop the wallpaper that is already adhered to the wall. The patterns should connect. Continue as necessary.
Mirror Sticker
Each mirror sticker order comes on one 11" x 17" sheet.
1. Clean - Using dish soap, wash your mirror/window and dry it completely.
2. Detach -Remove the sticker from the liner.
3. Place - Place the tip of your sticker to your desired location.
4. Apply - Starting on the top of the sticker, press down to stick it to the mirror/window.
5. Smooth - Use a flat object or your hand to smooth down the sticker as you work
Wall Decal Sticker
Each wall decal sticker order comes on one 11" x 17" sheet.
1. Clean - Using dish soap, wash your wall and dry it completely.
2. Detach - Remove the sticker from the liner.
3. Place - Place the tip of your sticker to your desired location.
4. Apply - Starting on the top of the sticker, press down sticking to the wall.
5. Smooth - Use a flat object or your hand to smooth down the sticker as you work.